|
-
Cordless Drills. Different by Design. Our cordless drills
look different, because they are different. Crafted to the highest level of
German engineering, Festool cordless drills offer a level of quality not
found in other cordless drills. From the EC-TEC brushless motors, to the
interchangeable Centrotec and FastFix chucks, these cordless drills were
designed to work the way you work.
-
Five Drills in One. Thanks to Festool's innovative FastFix
chuck system, the T+3 cordless drill is incredibly versatile and does the
work of five drills in one. (1) The eccentric chuck is perfect for corners
and against adjoining edges. (2) The keyless drill chuck can be used with
drill and driver bits up to 1/2" in diameter. (3) For lighter weight and a
more compact footprint, use the smaller, lighter Centrotec chuck with its
full array of interchangeable drill and driver bits. (4) The most unique is
the right-angle chuck which provides a 90° angle to the drive motor for
tight spaces. The eccentric and right-angle chucks can both swivel a full
360 degrees with 16 locking positions. (5) The optional depth stop chuck
provides consistent, precise depth settings regardless of work piece
material. If that's still too few options, you can also use standard hex
driver bits in the drill with no chuck attached. The T+3 cordless drill set
includes all chucks except the depth stop chuck.
-
Bringing The Power.All the versatility of the T+3 cordless
drill is combined with a robust design that features a long-lasting, energy
efficient brushless motor, compact transmission, and electronic health
monitoring. Brushless motors offer significant advantages over motors with
brushes, including higher efficiency and reliability, reduced noise, and
longer service life to name a few. This helps the T+3 cordless drill
outperform other drills that would otherwise be in the same class. Nearly
all of Festool's power tools feature intelligent electronic monitoring and
feedback which makes the tool smarter. In the case of the T+3, this
technology protects the motor from overload, provides an electronic (rather
than mechanical) clutch feature, and an intelligent drill mode with an
electronic clutch override, as well as other innovative features.
| Includes |
| Centrotec Starter Set |
|
| FastFix Right Angle, Eccentric and ½" Drill
Chucks |
|
| Two (2) Lithium Ion Batteries |
|
| TRC 3 Charger |
|
| Systainer |
SYS 2 w/ Storage Compartment |
| Specifications |
| Chuck Capacity |
Up to ½" (13 mm) |
| Max. Torque in Steel |
265.5 in-lbs. (30 Nm) |
| Max. Torque in Wood |
220 in-lbs. (25 Nm) |
| Time to Full Charge |
70 minutes |
| Torque Setting Range |
0.5 - 8 Nm (1.4 kg) |
| Weight |
3 lbs. 1.4 oz. (1.4 kg) |
|
|
|
|
