|
At the heart of this model is
Jet’s self-cooling drum. The 5" x 16" extruded aluminum,
precision machined and balanced drum operates at 1700 RPM. The continuous duty
motor offers the advantages of heavier use for longer periods of time. It is
especially helpful for abrasive planing. Jet’s "no-give" power
feed conveyor is an integral part of the 16-32® PLUS. The durable, thin
abrasive belt and the reinforced steel bed provides a rigid surface to precisely
sand stock to within .010" uniform thickness.
The 16-32 PLUS
includes tension rollers mounted next to the drum for sanding small or
thin stock automatically without a press-back application or special jigs. Stock
as short as 2 1/4" and as thin as 1/16" can be sanded hands-free.
A new spinning height adjustment
handle allows a tight grip and the ability to make radical height changes
quickly, while also allowing minute adjustments for extremely precise sanding
thickness control.
The 16-32 PLUS offers both
maximum and minimum sanding capacity.
Maximum width: 32"
Maximum thickness: 3"
Minimum length: 2 1/4"
Minimum thinness: 1/16"Scroll saw cut-outs can be cut easier on thicker
stock and then sanded to the desired thinness.
Multiple cut-outs can be sanded at one time.
- DIMENSIONS: Height:
18"; Depth: 23"; Width: 32".
- DRUM: 5" x 16"
extruded aluminum, precision machined and balanced, 1700 RPM.
- DUST COVER: Plastic with
2 1/2" diameter dust port for use with shop vacuum or high C.F.M. dust
collector.
- BEARINGS: 1"
sealed, permanently lubricated, ball bearing.
- ABRASIVE STRIPS: One
strip included. Genuine Performax abrasives are available as READY-TO-WRAP™
factory tapered strips or READY-TO-CUT™ pre-marked rolls. No felt, Velcro,
or adhesives necessary.
- CONVEYOR BED: Precision
flattened reinforced steel bed. TRACKERS included. 120 grit abrasive
conveyor belt included.
- CONVEYOR MOTOR: 43
in.-lb. torque, direct drive D.C. motor. Infinitely-variable feed rate of
0-10’/minute.
- DRIVE MOTOR: 1.5 HP;
TEFC; 1760 RPM; 115 Volts; 60 HZ; single phase, cont. duty, thermal overload
protection.
- HEIGHT ADJUSTMENT: 1/16"
per turn. DEPTH GAUGE included.
- DUST COLLECTION: Mandatory
for all models. 400-600 CFM recommended.
|
